NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

36 Chapter3

Link Conﬁguration Screens

Link Selection

The Link Selection screen (#85) in Figure 3-2 is displayed when you

press the

[Go To LINK] function key at the Unguided Conﬁguration

screen (#80). It is also displayed when you type the path name:

@LINK

in the command window of any screen and press the

[Enter] key.

NOTE Fields described as “HP modiﬁable” should be changed only upon the

recommendation of your HP representative.

Figure 3-2 Link Selection Screen

Use the ﬁelds and the function keys of the select screen to perform the

desired action as follows:

• To deﬁne a new link conﬁguration, specify the link name and the

type; then press the

[Add] function key. The path for the selected link

name is added to the conﬁguration ﬁle and the data screen for the

type speciﬁed is displayed.

• To modify an existing link conﬁguration, specify the linkname; then

press the

[Modify] function key. The data screen that contains

information for the speciﬁed link name is displayed.

• To change the name of an existing link conﬁguration, specify the link

name and a new name; then press the

[Rename] function key. The

previously conﬁgured link name is replaced and the screen displays