MSL5000 and 6000 Series Tape Libraries User Guide

Remote Management Interface
109HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Accessing the Remote Management Interface
To access your library remotely, the library must be in the ready mode to establish
communications with the Remote Management Interface. If you are unable to
access the unit with your browser, verify the library is not being operated locally.
1. Type the IP address in the Location field of your Web browser, and press
Enter.
The browser connects to the Remote Management Interface and displays a
login prompt.
Figure 64: Remote Management Interface login screen
2. Enter your level 1 or level 2 password in the appropriate field and click Login.
Note: The default level 1 password is 1. The default level 2 password is 2. The level 1
password only allows use of passive features, such as viewing library status.
Use the MSLUtil.exe diagnostic utility and the serial interface to change the default
passwords.