MSL5000 and 6000 Series Tape Libraries User Guide

Maintenance
130 HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
4. Select Cleaning. If the default entry is not the tape drive to be cleaned, press
Drive in the Destination Element Type box to sequence through the
available tape drive choices. You can also use the Decimal Keypad to enter
the tape drive number directly.
5. When the destination entry is correct, select Execute Clean.
6. When the cleaning cycle completes, the library returns the cleaning cartridge
back to the cleaning cartridge slot (Cln’g Slot 0). To remove the cleaning
cartridge, select Magazine Access from the library Status screen.