MSL5000 and 6000 Series Tape Libraries User Guide

Maintenance
134 HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Figure 77: Updating firmware using the Remote Management Interface
4. Select Flash Library from Remote File or Flash Library from Local File.
Note: If you select Flash Library from Local File, the *.bin file must be copied to the
/upload directory, which is located on the library at the IP Address/upload.
5. Click Start the Flash. The library firmware automatically updates.
6. The library will reboot. Verify that the firmware level has been updated
successfully by selecting the Library Info button from the View System
Data area of the GUI to view the Firmware Revision.
Using HP StorageWorks Library & Tape Tools
HP StorageWorks Library & Tape Tools may already be installed on your host. If
not, you can download it from
http://www.hp.com/support/tapetools .
Online help and instructions are included with the utility.