MSL5000 and 6000 Series Tape Libraries User Guide

Installation
41HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Converting a Tabletop Model to a Rackmount Model
To make a tabletop library ready for rack enclosure installation:
1. Remove the rubber feet.
2. Remove the cover.
3. Attach the inner rails to the library using the supplied Allen wrench and
screws. Tighten the screws until snug.
4. Proceed to “Setting Up the Tabletop Model.”
Figure 11: Converting a tabletop model (four-drive model shown)