MSL5000 and 6000 Series Tape Libraries User Guide

Installation
51HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Four Tape Drives, Dual Host System
Figure 18 shows a typical SCSI cable configuration for a library with four tape
drives installed using a dual host system.
Figure 18: MSL6060/MSL5060/MSL5052 library SCSI cable configuration (four
tape drives, dual host system)
Note: Daisy-chaining Ultrium 460 drives is not recommended due to degraded
performance.
1 SCSI Terminator
2 0.5 m jumper cables
3 RS-232 diagnostic cable (for service
only)
4 To Host System
5 0.25 m or 0.5 m jumper cable
1
2
5
5
4
3
4
1