MSL5000 and 6000 Series Tape Libraries User Guide

Operation
78 HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Move Media
Select this option to display the Move Media screen (see Figure 42). The Move
Media option lets you remove a cartridge from a tape drive, a data slot in any
magazine, or a mail slot in a left-hand magazine. This option also lets you load
and unload tape cartridges from the installed tape drives.
See the section on “Replacing a Cleaning Cartridge in a Reserved Slot” on
page 131 for detailed removal information.
Caution: To reduce the risk of drive damage, use DLT, SDLT, and Ultrium
cleaning cartridges only in their respective drive types.
Caution: Remove media from all drives and slots prior to library transport.
Figure 42: Move media screen (two-drive model shown)
GUI Contrast Controls
Select these options to increase or decrease the contrast of the GUI display (see
Figure 38). Incremental steps are set by adjusting the GUI contrast controls from
the library Status screen. Incremental steps can range from 0 to 31 depending on
your preference. These settings are volatile and are restored to default values upon
reboot or power cycling.