Owner's manual
Table Of Contents
- Contents
- Introduction
- Installation
- Library Configuration
- Changing Default Configuration Settings
- Setting a SCSI ID
- Setting Up a Reserved Slot
- Reserved Slot Numbering
- Figure 24 Reserved slot locations, SDLT
- Figure 25 Reserved slot locations, Ultrium (MSL6030)
- Figure 26 Reserved slot locations, lower module, SDLT
- Figure 27 Reserved slot locations, lower module, Ultrium (MSL6060)
- Figure 28 Total reserved slots screen
- Figure 29 Reserved slots numeric keypad screen
- Figure 30 Total reserved slots confirmation screen
- Reserved Slot Numbering
- Configuring the Network Settings
- Operation
- Front Panel
- Library Display Screens and Options
- Menu Selections
- Inserting and Removing Tape Cartridges
- Remote Management Interface
- Maintenance
- Troubleshooting
- Regulatory compliance notices
- Regulatory compliance identification numbers
- Federal Communications Commission notice
- Canadian notice (Avis Canadien)
- European Union notice
- Japanese notices
- Korean notices
- Taiwanese notices
- Laser compliance notices
- Recycling notices
- Disposal of waste equipment by users in private household in the European Union
- Danish notice
- Dutch notice
- Czecholslovakian notice
- Estonian notice
- Finnish notice
- French notice
- German notice
- Greek notice
- Hungarian notice
- Italian notice
- Latvian notice
- Lithuanian notice
- Polish notice
- Portuguese notice
- Slovakian notice
- Slovenian notice
- Spanish notice
- Swedish notice
- Specifications
- Electrostatic Discharge
- Configuration Examples
- Optional Fibre Channel Card
- Index
MSL6000 series tape library user guide 159
BSpecifications
This appendix lists the following specifications met by HP StorageWorks MSL Series tape libraries:
• Power, page 159
• Mechanical, page 159
• Environmental (All Models), page 160
• Acoustics, page 161
• Safety and Regulatory, page 161
Power
Mechanical
Table 13 Power Specifications
Description MSL6030/MSL6026
Specification
MSL6060/MSL6052
Specification
Voltage 100 to 240 VAC, +/- 10% 100 to 240 VAC, +/- 10%
Current 3.0 to 6.0 A 3.0 to 6.0 A
Line frequency operating
range
50 to 60 Hz 50 to 60 Hz
Power consumption 180 W (2 tape drives) 300 W (4 tape drives)
Maximum peak power
consumption
200 W (2 tape drives) 360 W (4 tape drives)
Table 14 Rackmount Model Mechanical Specifications
Description MSL6030/MSL6026
Specification
MSL6060/MSL6052
Specification
Height 8.75 inches (22.2 cm), nominal
(5U)
17.5 inches (44.4 cm),
nominal (10U)
Width 17 inches (43.2 cm) 17 inches (43.2 cm)
Depth 31.5 inches (80 cm) 31.5 inches (80 cm)
Weight 61 pounds (27.7 kg), estimated
(with 2 tape drives installed)
123 pounds (55.9 kg),
estimated (with 4 tape drives
installed)