About the HP MSR Router Series Command References(V7) Part number: 5998-6352 Software version: CMW710-R0106 Document version: 6PW101-20140807
Legal and notice information © Copyright 2014 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
About the HP MSR Router Series Command References These command references apply to the following models of the HP MSR routers: Model • MSR1002-4 MSR1000 • • • • • • • MSR2000 MSR3000 MSR2003 MSR2004-24 MSR2004-48 MSR3012 MSR3024 MSR3044 MSR3064 • MSR4060 • MSR4080 MSR4000 The HP MSR router series command references describe the commands and command syntax options available for the HP MSR Routers. Command reference Content Covers the commands for logging in to and setting up an MSR router.
Command reference Content Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: Layer 2 – LAN Switching Command Reference • • • • • • • • MAC Address Table Ethernet link aggregation Port Isolation Spanning Tree Loop detection VLAN QinQ LLDP Covers WAN access technologies.
Command reference Content • RIP • OSPF • IS-IS • BGP • Policy-Based Routing • IPv6 Static Routing • RIPng • OSPFv3 • IPv6 IS-IS • IPv6 Policy-Based Routing • Routing policy • MTR Covers the commands for Layer 3 IPv4 multicast protocols (IGMP and PIM), and Layer 3 IPv6 multicast protocols (MLD and IPv6 PIM), Layer 2 IPv4 multicast protocols (IGMP snooping).
Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH). This command reference includes: Security Command Reference • • • • • • • • • • • • • • • • • • • • • • • AAA 802.
• • • • • • • • • • • • • • • NQA NTP PoE SNMP RMON NETCONF CWMP EAA Process monitoring and maintenance Sampler Mirroring NetStream IPv6 NetStream sFlow Information Center Covers OAA commands. This command reference includes: OAA Commands Probe Commands • OAP module • OAP Covers Probe commands.
