Installation manual

Only one 4G extender cable is provided with the router. Purchase another one yourself if you want to

install two 4G extender cables. Table 6 lists 4G

extender cables provided by HP. You can also use 4G

extender cables from other vendors, for any consequences resulting from which HP assumes no liabilities.

Table 6 HP 4G extender cables

J number HP 4G extender cable

JG522A HP MSR 2.8m Extender Cable

JG666A HP MSR 6m Extender Cable

JG667A HP MSR 15m Extender Cable

Figure 22 JG704A router antenna installation precautions

Connecting interface cables

This section uses the Ethernet cable for example.

Because fixed Ethernet ports support MDI/MDIX autosensing, you can use either a straight-through cable

or a crossover cable for connection.

To connect an Ethernet cable:

1. Connect one end of the cable to an Ethernet port on the router.

2. Connect the other end of the cable to the peer device.

3. Examine the port LED status. For more information, see "LED description."

Figure 23 Connecting th

e router to a computer