Reference Guide

Inserting a digital card
CAUTION: To avoid damaging the digital card or the computer, do not insert any type of adapter
into the Media Card Reader.
CAUTION: To prevent damage to the digital card connectors, use minimal force to insert a digital
card.
1. Hold the digital card label-side up, with the connectors facing the computer.
2. Insert the card into the Media Card Reader, and then push in on the card until it is firmly seated.
You will hear a sound when the device has been detected, and a menu of available options may
be displayed.
Removing a digital card
CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to
safely remove the digital card.
To remove a digital card, follow these steps:
1. Save your information and close all programs associated with the digital card.
2. To eject the digital card, press in on the card (1), and then remove it from the slot (2).
NOTE: If the card does not eject, pull the card out of the slot.
Inserting a digital card 43