Deployment Guide

HP Velocity Server Side Deployment Guide 21
Installations Installing HP Velocity on servers with Broadcom teaming inter-
Installing HP Velocity on servers with Broadcom teaming
interfaces
Installing HP Velocity on Windows Servers using the Broadcom Advanced Control Suite NIC
Teaming feature might require the following additional steps.
If HP Velocity is installed on Windows Servers, ensure that the LiveQoS NDIS 6 Filter Driver is
disabled in the adapter settings (Figure 10).
To disable the LiveQoS NDIS 6 Filter Driver:
1. Install the HP Velocity server-side component as described in “Server-side installation” on
page 18.
2. Once the installation is complete, a prompt asking to reboot the system will appear. Click
NO.
3. Open the Network and Sharing Center from the Control Panel.
4. Click Change Adapter Settings.
5. Right-click Team 1 (Figure 9).
Figure 9. Adapter settings
6. In the list titled This connection uses the following items, deselect the checkbox next to
LiveQoS NDIS 6 Filter Driver (Figure 10).