HP EliteDesk 800 G1 Tower HP EliteDesk 800 G1 Small Form Factor HP EliteDesk 800 G1 Ultra-Slim Desktop Maintenance and Service Guide

4. Release the drive by pulling the release tab away from the drive (1) and sliding the drive out of the

bay (2).

5. Remove the four guide screws (two on each side) from the old drive. You will need these screws to

install a new drive.

Installing a 3.5-inch or 2.5-inch hard drive

1. Prepare the computer for disassembly (Preparation for disassembly on page 44)

2. Remove the access panel (

Access panel on page 45)

Drives