HP ProDesk 400 G1 Desktop Mini - Maintenance and Service Guide

Front bezel
The front bezel is secured to the access panel by tabs.
1. Prepare the computer for disassembly (
Preparation for disassembly on page 17).
2. Remove the access panel (
Access panel on page 18).
3. Position the access panel upside-down so you can access the inside of the bezel.
4. Pull down to loose the bottom, interior on the bezel (1).
5. Disengage the tabs on the top, interior of the bezel (2).
6. Remove the bezel from the access panel.
To install the front bezel, reverse the removal procedure.
Front bezel 25