Operation Manual

1–2 Getting Started

Hardware and Software Setup

Setting Up the Hardware

CAUTION: To ensure that the correct drivers load and to prevent file

corruption or damage to the components during initial setup:

■ Do not set up the notebook while it is docked in an optional Port

Replicator.

■ Do not remove the battery pack until the notebook has been

connected to external AC power.

■ Run the notebook on external AC power, not on battery power,

throughout initial setup.

To set up the notebook hardware:

1. Insert the battery pack:

a. Turn the notebook upside-down.

b. Align the battery pack with the notebook battery bay.

c. Insert the battery pack tabs into the battery bay recesses.

Inserting the battery pack tabs into the battery bay recesses