HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide June 2007 (Third Edition) Part Number 367256-00C
© Copyright 2004 - 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft®, MS Windows®, Windows®, and Windows NT® are U.S.
Contents About This Guide Technician Notes...........................................................................................................................................v Where to Go for Additional Help.................................................................................................................vi Telephone Numbers ...............................................................................................................................
Contents UTP Cable Specifications ......................................................................................................................... C-2 Using UTP Category 5 Cable in Gigabit over Copper Installations...................................................
About This Guide Use this guide for installing the HP ProLiant NC 150T PCI 4-port Gigabit Combo Switch Adapter. WARNING: To reduce the risk of personal injury from electric shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment. Improper repairs can create conditions that are hazardous. Technician Notes WARNING: Only authorized technicians trained by HP should attempt to repair this equipment.
About This Guide Where to Go for Additional Help HP updates networking software frequently to include new functionality and features. Complete the following steps to get the latest drivers, firmware, and documentation. 1. Go to the HP website (http://www.hp.com). 2. Click Support and Troubleshooting Information from the left menu bar. 3. Type the product name in the for product box and press Enter. For example, type NC370T. 4. Download the drivers, firmware, or documentation as needed.
1 Introduction Adapter Overview The HP NC150T PCI 4-port Gigabit Combo Switch Adapter is a 32-bit/66MHz, PCI, Ethernet adapter and a 4-port Gigabit Layer 2 Unmanaged Ethernet Switch. This device provides an on-board connection between the Ethernet controller and the Gigabit switch. The Ethernet controller delivers up to 1000 Mb/s Ethernet to the server uplink port of the Gigabit switch and is capable of auto-negotiating this link at 10, 100, or 1000 Mb/s.
Introduction Figure 1-1: RJ-45 port and LED locations Table 1-1: 10/100/1000 LED Operations for the NC150T PCI 4-port Gigabit Combo Switch Adapter LED Display Description Green On 10/100 Mb link to the network is established. Off No 10/100 Mb link to network is established. Blinking The adapter is sending or receiving network data at 10 or 100 Mb/s. On 1000 Mb link to the network is established. Off No 1000 Mb link to network is established.
2 Installing the Adapter Overview This chapter describes installation precautions and explains how to install the adapter. It also describes how to connect the network cable. WARNING: To avoid the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with the equipment before attempting installation of the adapter. Many servers are capable of producing energy levels that are considered hazardous.
Installing the Adapter Installing the Adapter in a Server Refer to the HP ProLiant server documentation for additional information on how to safely install a PCI card in the server. Figure 2-1: Installing the adapter in a server CAUTION: If the server is not PCI Hot Plug compliant, power it down and unplug the power cord from the power outlet before removing the server cover. Failure to do so may damage the adapter or server. 1. Power down the server. 2. Unplug the power cord from the power outlet.
Installing the Adapter Connecting the Network Cable IMPORTANT: Do not connect more than one NC150T PCI 4-port Gigabit Combo Switch Adapter port to any single other switch model. IMPORTANT: Do not use the NC150T PCI 4-port Gigabit Combo Switch Adapter as a cable aggregator for servers with iLO and RILOE ports. To secure the cable, plug the cable connector into the RJ-45 port. Ensure that the tab on the plug clicks into position, indicating that it is properly seated.
A Regulatory Compliance Notices Federal Communications Commissions Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory Compliance Notices For questions regarding your product, contact: Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800- 652-6672 For continuous quality improvement, calls may be recorded or monitored. For questions regarding this FCC declaration, contact: Hewlett-Packard Company P. O.
Regulatory Compliance Notices European Union Notice Products bearing the CE marking comply with the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
B Electrostatic Discharge Overview To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage, observe the following precautions: • Avoid hand contact by transporting and storing products in static-safe containers.
C Specifications NC150T PCI 4-port Gigabit Combo Switch Adapter Specifications Table C-1: NC150T PCI 4-port Gigabit Combo Switch Adapter Specifications Specification Description Network Controller Chipset Broadcom® 5705KFB Bus Type PCI Bus Width 32 bits Bus Speed 33 or 66 MHz Standards Supported by NIC IEEE 802.1Q, 802.3ab, 802.3u, 802.3x, 802.3 Data Transfer Method Bus Master DMA Switch Chipset BCM5385KPB and BCM5011KQM Standards Supported by Switch IEEE 802.3ab, 802.3u, 802.3x, 802.
Specifications UTP Cable Specifications For 1000BASE-T transmission, the cable must be: • Category 5 UTP or better • 22-26 AWG, 100Ω @ 1MHz • EIA/TIA 568a or EIA/TIA 568b Using UTP Category 5 Cable in Gigabit over Copper Installations For Gigabit over copper installations, Category 5 UTP or better 1000BASE-T cable must comply with the IEEE 802.3ab 1000BASE-T standard. For new installations, Category 5e (enhanced Category 5) or better cable is recommended.
