HP NC365T 4-port Ethernet Server Adapter User Guide Part Number 613562-001 June 2010 (First Edition)
© Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Contents Technician notes ........................................................................................................................... 4 Important safety information........................................................................................................................ 4 Where to go for additional help .................................................................................................................. 4 HP contact information .....................................
Technician notes Important safety information WARNING: Only authorized technicians trained by HP should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module-level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard.
4. Download the drivers, firmware, or documentation as needed. HP contact information For the name of the nearest HP authorized reseller: • See the Contact HP worldwide (in English) webpage (http://welcome.hp.com/country/us/en/wwcontact.html). For HP technical support: • • In the United States, for contact options see the Contact HP United States webpage (http://welcome.hp.com/country/us/en/contact_us.html). To contact HP by phone: o Call 1-800-HP-INVENT (1-800-474-6836).
Introduction Overview The HP NC365T 4-port Ethernet Server Adapter is a high-performance, low-profile, 4-port PCI express Ethernet adapter that delivers up to 1000 Mbps Ethernet over twisted-pair (copper) category 5 or better cabling. It is powered by an Intel 82580 chipset. The NC365T adapter, which ships with a standard-height chassis bracket and also includes a low-profile chassis bracket, has a fully integrated controller capable of auto-negotiating a link at 10, 100, or 1000 Mbps.
The NC365T LED indicators operate as described in the following table. LED indicator Status Description LNK/ACT On This mono-color green LED indicates that the link to the adapter is established. The adapter is receiving power and the cable connection is working. Off No link to the adapter is established. The adapter is not receiving power or the cable connection is faulty. Flashing The adapter is sending or receiving network data at 10/100/1000 Mbps, as indicated by the 10/100/1000 (speed) LED.
Installing an adapter Installation overview This section describes installation precautions, how to install the adapter, and how to connect the network cable. WARNING: To reduce the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with the server before attempting the installation.
Installing a low profile bracket You may have to install a low profile bracket to complete the product installation. The low profile bracket replaces the existing standard profile bracket shipped on the product. To install a low profile bracket: 1. Using a correctly sized slotted screwdriver, carefully remove the two board lock screws located at the top and bottom of the connector. 2. Remove the standard profile bracket and place the low profile bracket over the connector.
Specifications HP NC365T specifications Specification Value Network Controller Chipsets Intel 82580 MAC Bus Type x4 PCI-Express v2.0 Bus Width Four lane On-board Memory 56 KB Data Transfer Method Bus Master DMA Boot ROM Support Yes Management Capabilities PXE 2.2, ACPI 1.1a Power Requirement 5.0 Watts @ 3.3v Data Transmission Rate 10 Full/10 Half, 100 Full/100 Half, 1000 Full Standards Supported IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.
Maximum distances for Gigabit over copper cable are 100 meters (328 feet).
Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this regulatory model number.
Declaration of conformity for products marked with the FCC logo, United States only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, contact us by mail or telephone: • Hewlett-Packard Company P. O.
Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available (in English only) either within the product documentation or at the following HP website (http://www.hp.eu/certificates) (type the product number in the search field).
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage: • Avoid hand contact by transporting and storing products in static-safe containers.
Acronyms and abbreviations ACPI Advanced Configuration and Power Interface APM advanced power management CSA Canadian Standards Association DMA direct memory access IEEE Institute of Electrical and Electronics Engineers LED light-emitting diode MDI medium dependent interface MDI-X medium dependent interface-crossover NIC network interface controller PCI Express Peripheral Component Interconnect Express PXE Preboot Execution Environment RoHS Restriction of Hazardous Substances Acronyms and abbrev
UTP unshielded twisted pair VDC voltage direct-current WOL Wake-on LAN Acronyms and abbreviations 18
Index A installation overview 8 installing adapters 9 adapter installation 8 adapter LEDs 6 adapters 6 J B K bracket, low profile 9 Korean notices 14 C M cable configuration 10 cable connectors 10 cables, networking 9 Canadian notices 13 class B equipment 12 compliance 12 modifications, FCC notice 13 D overview 6 Declaration of Conformity 13 disposal, waste 14 driver and software information 4 drivers 4 Japanese notice 14 N network cable 6, 9, 10 O R regulatory compliance identification nu
W warnings 4, 8 website, HP 5 Index 20
