Instruction Manual

Configuring iSCSI boot support 31
6.
From the Controller Selection menu, select your controller and port and press Enter.
7. After you have selected a controller, the Controller Configuration menu displays. Tab to select
Network Configuration and press Enter.
8. Set up an IP Address by either enabling DHCP or setting up a Static IP Address.
If using target discovery through DHCP, add the root path to the DHCP server and enable DHCP
discovery through iSCSISelect.
To enable DHCP,
o Tab to DHCP , select Enabled, and then press Enter.
o Tab to Save DHCP Settings and press Enter. The DHCP IP Address menu displays.