NC6134 Gigabit Server Adapter User Guide Fourth Edition (June 2007) Part Number 234603-00D Compaq Computer Corporation
Notice © 2001, 2007 Compaq Information Technologies Group, L.P. Compaq, the Compaq logo, and ProLiant are registered in U.S. Patent and Trademark Office. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States and other countries. Intel is a trademark of Intel Corporation in the United States and other countries. The Open Group and UNIX are trademarks of The Open Group in the United States and other countries.
Contents About This Guide Symbols in Text .......................................................................................................... v Compaq Technician Notes .......................................................................................... v Where to Go for Additional Help............................................................................... vi Compaq Customer Support ........................................................................................
About This Guide This user guide can be used for reference when installing the Compaq NC6134 Gigabit Server Adapter. WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment. Improper repairs could create conditions that are hazardous.
vi Compaq NC6134 Gigabit Server Adapter User Guide WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, do not exceed the level of repair specified in these procedures. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs could create conditions that are hazardous.
About This Guide Compaq Website For Compaq Web-based support services, visit http://www.compaq.com/support Navigate to a specific product and then look for support information from this list of support resources. For a complete list of available SoftPaq files, navigate to: http://www.compaq.com/support/files/allsp.html Send email to: support@compaq.com PaqFax Number The Compaq fax-on-demand retrieval system provides product-specific information.
viii Compaq NC6134 Gigabit Server Adapter User Guide North America The Compaq Customer Support department for North America can be reached at 1-800-652-6672 (1-800-OKCOMPAQ) For continuous quality improvement, calls may be monitored or recorded. Europe, the Middle East, and Africa In Europe, the Middle East, and Africa, contact your local Compaq authorized service provider.
Chapter 1 Introduction Overview The Compaq NC6134 Gigabit Server Adapter is a stand-alone, single-port, 64-bit PCI Gigabit (1000BASE-SX) Ethernet adapter. It uses fiber-optic cable and provides failover capabilities with other Gigabit and 10/100 adapters installed in the workstation or server. For the latest functionality, features, and operating system support for this server adapter, see the networking page at (http://h18004.www1.hp.com/products/servers/networking/index-nic.html).
1-2 Compaq NC6134 Gigabit Server Adapter User Guide LED Indicators The NC6134 LED indicators operate as described in the following table. Table 1-1 LED Operations for the NC6134 Adapter LED Status LNK On Link to the adapter is established. The adapter is receiving power and the cable connection is secure. Off No link to the adapter is established. The adapter is not receiving power or the cable connection is faulty.
Chapter 2 Installing the Adapter This chapter describes installation precautions and explains how to install the adapter. It also describes how to connect the network cable. WARNING: To avoid the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with your equipment before attempting the installation of the adapter. Many servers are capable of producing energy levels that are considered hazardous.
2-2 Compaq NC6134 Gigabit Server Adapter User Guide Installing the Adapter in a Server Refer to the Compaq ProLiant server documentation for additional information on how to safely install a PCI card in your server. Figure 2-1. Installing the adapter in a server 1. If the server is not PCI Hot Plug compliant, power down the server and unplug the power cord. 2. Remove the server cover and the cover bracket from a PCI slot.
Installing the Adapter Connecting the Network Cable The NC6134 Server Adapter uses SC fiber ports. These ports support multimode fiber with a maximum cable length dependent on the fiber type, mode, and cable size. See Table C-2 for supported cables and distances. To insert the network SC connector into the adapter port, line up the slot on the fiber connector with the key on the adapter and push gently until the retainers click into place.
Appendix A Regulatory Compliance Notices European Union Notice Products with the C0E Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Appendix B Electrostatic Discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage, observe the following precautions: ■ Avoid hand contact by transporting and storing products in static-safe containers.
Appendix C Specifications NC6134 Gigabit Server Adapter Specifications Table C-1 NC6134 Gigabit Server Adapter Specifications Specification Description Network Controller Chipset Intel 82542 MAC Data Transfer Method 64-bit/66MHz PCI, compatible with 64-bit/33MHz or 32bit/33MHzm (Bus Master DMA) Standards Supported (Varies by OS) IEEE 802.3z, 802.3ab, 802.3u, 802.1p, 802.1Q Dimensions 7.0 x 4.8 inches (L x W), 17.8 cm x 12.
C-2 Compaq NC6134 Gigabit Ethernet Server Adapter User Guide Fiber Cable Specifications To connect to the network, the NC6134 Server Adapter uses 1000BASE-SX fiber port. Table C2 describes the mode, cable size, and maximum distance specifications this adapter. Table C-2 Fiber Cable Maximum Distances for 1000BASE-SX Mode Size Max Distance Multimode 62.
