NC6136 Gigabit Server Adapter User Guide Third Edition (June 2007) Part Number 212419-00C Compaq Computer Corporation
Notice © 2001, 2007 Compaq Information Technologies Group, L.P. Compaq, the Compaq logo, and ProLiant are registered in U.S. Patent and Trademark Office. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States and other countries. Intel is a trademark of Intel Corporation in the United States and other countries. The Open Group and UNIX are trademarks of The Open Group in the United States and other countries.
Contents About This Guide Symbols in Text .......................................................................................................... v Compaq Technician Notes .......................................................................................... v Where to Go for Additional Help............................................................................... vi Compaq Customer Support ........................................................................................
About This Guide This user guide can be used for reference when installing the Compaq NC6136 Gigabit Server Adapter. WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment. Improper repairs could create conditions that are hazardous.
vi Compaq NC6136 Gigabit Server Adapter User Guide WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, do not exceed the level of repair specified in these procedures. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs could create conditions that are hazardous.
About This Guide vii Compaq Website For Compaq Web-based support services, visit http://www.compaq.com/support Navigate to a specific product and then look for support information from this list of support resources. For a complete list of available SoftPaq files, navigate to: http://www.compaq.com/support/files/allsp.html Send email to: support@compaq.com PaqFax Number The Compaq fax-on-demand retrieval system provides product-specific information.
viii Compaq NC6136 Gigabit Server Adapter User Guide North America The Compaq Customer Support department for North America can be reached at 1-800-652-6672 (1-800-OKCOMPAQ). For continuous quality improvement, calls may be monitored or recorded. Europe, the Middle East, and Africa In Europe, the Middle East, and Africa, contact your local Compaq authorized service provider.
Chapter 1 Introduction Overview The Compaq NC6136 Gigabit Server Adapter is a stand-alone, single port, 64-bit/66MHz PCI Gigabit (1000BASE-SX) Ethernet adapter. It uses fiber-optic cable that provides failover capabilities with other Gigabit and 10/100 adapters installed in a server. The NC6136 Gigabit Server Adapter is a supported option for selected Compaq ProLiant™ servers.
1-2 Compaq NC6136 Gigabit Server Adapter User Guide 1000-SX Link LED Activity LED Fiber SC Port (not used) Figure 1-1. Fiber SC Port and LED locations LED Indicators The NC6136 Gigabit Server Adapter has two diagnostic LED indicators for the fiber SC port. Table 1-1 LED Operations for the NC6136 Adapter LED Name Display LNK On The adapter is receiving power; the cable connection is good. Off The adapter is not receiving power or the cable connection is faulty.
Chapter 2 Installing the Adapter This chapter describes installation precautions, how to install the adapter, and how to attach the fiber network cable. WARNING: To avoid the risk of personal injury or damage to the equipment, consult the Safety information and user documentation provided with your equipment before attempting the installation. Many servers are capable of producing energy levels that are considered hazardous.
2-2 Compaq NC6136 Gigabit Server Adapter User Guide Installing the Adapter in a Server Refer to the Compaq ProLiant documentation for the specific steps necessary to safely install a PCI card in your server. Figure 2-1. Installing the adapter in a server 1. If the server is not PCI Hot Plug compliant, power down the server and unplug the power cord. 2. Remove both the server cover and the cover bracket from a PCI slot.
Installing the Adapter 2-3 Connecting the Fiber Network Cable The NC6136 Server Adapter has one SC fiber port. This port supports 1000BASE-SX multimode fiber cable with a maximum cable length dependent upon the fiber type, mode, and cable size. See Appendix C for maximum cable lengths. To insert the network SC connector into the adapter port, line up the slot on the fiber connector with the adapter and gently push until the retainers click into place.
Appendix A Regulatory Compliance Notices European Union Notice Products with the C0E Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Appendix B Electrostatic Discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage, observe the following precautions: Avoid hand contact by transporting and storing products in static-safe containers.
Appendix C Specifications NC6136 Gigabit Server Adapter Specifications Table C-1 NC6136 Gigabit Adapter Specifications Specification Description Network Controller Chipset Intel 82543GC MAC Data Transfer Method 64-bit/66MHz PCI, compatible with 64-bit/33MHz or 32-bit/33MHz Bus Master DMA Standards Supported IEEE 802.3z, 802.3ad (static configuration mode only), 802.1p, 802.1Q Dimensions 7.0 x 4.8 inches (L x W), 17.8 cm x 12.
C-2 Compaq NC6136 Gigabit Server Adapter User Guide Fiber Cable Specifications To connect to the network, the NC6136 uses 1000BASE-SX fiber cable. Table C-2 Fiber Cable Maximum Distances for 1000BASE-SX Mode Size Max Distance Multimode 62.
