Manual

Specifications C-5
Gigabit Over Copper Internal Straight-Through Pinouts
Unlike some connections in which the crossover function is implemented internally at the
hub/switch, the NC7131 adapter provides its own automatic crossover function. This means you
can wire twisted-pair media straight-through for adapter-to-hub/switch or adapter-to-adapter
connections, using the pinouts shown in Table C-4.
NOTE: To operate at Gigabit speeds, all four pairs of wires must be terminated within the RJ-45
connector.
Table C-4
Gigabit Over Copper Pinouts Using Internal Crossover
Pin Function Color Match Function Pin
1 BI_DA+ White/Orange BI_DA+ 1
2 BI_DA- Orange/White BI_DA- 2
3 BI_DB+ White/Green BI_DB+ 3
4 BI_DC+ Blue/White BI_DC+ 4
5 BI_DC- White/Blue BI_DC- 5
6 BI_DB- Green/White BI_DB- 6
7 BI_DD+ White/Brown BI_DD+ 7
8 BI_DD- Brown/White BI_DD- 8
Figure C-3 shows straight-through Gigabit over copper connector wiring to be used when the
crossover function is implemented within the hub/switch.
1
2
3
4
5
6
7
8
White/Orange
Orange/White
White/Green
Green/White
Blue/White
White/Blue
White/Brown
Brown/White
Figure C-3. Gigabit Straight-Through Wiring for RJ-45 Connector