User's Manual

6-79
Setup Menus
is automatically displayed. When unselected, the display remains unchanged and the
cursor moves off-screen to the relevant page stored in memory.
Auto Wrap
Factory default: Unselected
The setting of this option determines whether characters wrap to the next line when the
right margin is reached. When unselected, on reaching the right margin, the last
character position will be overwritten by every new character received.
Auto New Line
Factory default: Unselected
When selected, this will cause a carriage return command to be appended to every line
feed command received.
Auto Line Feed
Factory default: Unselected
When selected, this will cause a line feed command to be appended to every carriage
return command received.
Application Keypad
Factory default: Unselected
The setting of this option determines the effect of pressing keys in the keypad on the
right side of the keyboard.
When unselected, the keypad is in numeric mode and keys will generate the characters
shown on the key caps. When selected, the keypad is in application mode and keys
will generate control functions when pressed. The top row of four keys act as the
equivalent DEC function keys PF1 through PF4.
Application Cursor Keys
Factory default: Unselected
When this option is selected the cursor keys will generate application program codes
when pressed. Unselected, the keys will generate normal cursor movement commands.
Display Controls
Factory default: Unselected
The setting of this option determines whether received control codes are actioned or
displayed. When selected, a representation of most control codes will be displayed on
the screen.