User's Manual

13-1

IBM 3151 Emulation

This chapter describes features of the IBM 3151 terminal emulation.

Introduction

The IBM 3151 emulation is based on the native mode of the IBM 3151 Model 11

terminal. The emulation is configured using the IBM 3151 Settings dialog box which

is described in the Setup Menus chapter. The display is set to 24 rows by 80 columns

by default, but you can select one of four display formats from the IBM 3151

Settings dialog box:

24 rows x 80 columns

25 rows x 80 columns

24 rows x 132 columns

25 rows x 132 columns

Session Configuration

WBT Mode

This section describes the basic procedure for creating a session configuration when

the terminal is in WBT mode. The options available are described in detail in chapter

1. Click the Configure tab in the Terminal Connection Manager then click the

Add button to display the New Connection dialog box.

2. Select Terminal Emulation Client and click OK. The Terminal Emulation

Client Connection Wizard - Connection Information dialog box will be

displayed.

3. Enter a name which will identify this session configuration for future selection in

the Connection Name box.