User's Manual

C-66
Host Command Summary
KEYBOARD
Define Return key (Conversational mode) ESC u *
Lock keyboard ESC c
Unlock keyboard ESC b
Simulate function key ESC d *
REPORTS
Report cursor address ESC a
Report emulation status ESC ^
Report firmware revision level ESC _
ANSI Mode
CHARACTER SETS
Select G0 character set * ESC ( *
Select G1 character set * ESC ) *
Shift out to G0 character set SI
Shift out to G1 character set SO
CURSOR
Autowrap enabled ESC [ ? 7 h
Autowrap disabled ESC [ ? 7 l
Clear tab stops (0 = cursor position, 2 or 3 = all) ESC [ * g
Cursor enabled ESC [ ? 25 h
Cursor disabled ESC [ ? 25 l
Horizontal tab HT
LF is LFCR (new line mode) ESC [ 20 h
LF is LF only ESC [ 20 l
Move cursor left one column BS
Move cursor left * columns ESC [ * D
Move cursor right * columns ESC [ * C
Move cursor down one line LF or VT or FF
Move cursor down one line ESC D or IND
Move cursor down * lines ESC [ * B
Move cursor up one line ESC M or RI
Move cursor up * lines ESC [ * A
Move cursor to beginning of line CR
Move cursor to column one of next line NEL
Move cursor to column one of next line ESC E
Move cursor to column one & down * lines ESC [ * E
Move cursor to column one & up * lines ESC [ * F
Move cursor to column * on current line ESC [ * G
Move cursor to line *l and column *c ESC [ *l ; *c H
Move cursor * tab stops ESC [ * I
Move cursor * previous tab stops ESC [ * Z
Set/clear * tab stops ESC [ * W
Set horizontal tab ESC H or HTS