User's Manual

C-67
Host Command Summary
DISPLAY
Insert * spaces at cursor location ESC [ * @
Restore cursor position & video attribute ESC 8
Save cursor position & video attribute ESC 7
Set current line to single width (80 columns) ESC # 5
Set current line to double width (40 columns) ESC # 6
Scroll display down * lines ESC [ * T
Scroll display up * lines ESC [ * S
Set current video attributes ESC [ * m
Write to message field ESC P * = * ESC \
EDITING
Delete * blank lines at cursor position ESC [ * M
Delete * characters at cursor position ESC [ * P
Erase * characters & attributes at cursor ESC [ * X
Erase field * ESC [ * N
Erase line portion (0 = from, 1 = to, 2 = all) ESC [ * K
Erase screen portion (0 = from, 1 = to, 2 = all) ESC [ * J
Insert * blank lines at cursor position ESC [ * L
Repeat last character * times ESC [ * b
GENERAL OPERATION
Cancel current escape sequence CAN
Execute self tests ESC [ * y
Reset emulation ESC c
Set emulation configuration ESC P * ? * ESC \
Set mode ESC [ * h
Reset mode ESC [ * l
Sound bell BEL
Read screen contents ESC [ * ; * ; * ; * v
Terminate current escape sequence SUB
Transmission enabled (XON) DC1
Transmission disabled (XOFF) DC3
KEYBOARD
Lock keyboard ESC `
Lock keyboard ESC [ 2 h
Unlock keyboard ESC b
Unlock keyboard ESC [ 2 l
REPORTS
Report configuration values ESC [ * x
Report cursor position ESC [ 6 *
Report terminal ID & version ESC [ * c
Report status of last self test ESC [ 5 *