Manual

Chapter 4 Configuration
56
Fibre Controller Options
The Fibre Controller Options dialog box allow you to inspect and/or change Fibre
Controller options. These options should remain at the defaults unless you have a
high degree of expertise with Fibre RAID Controllers.
Figure 4-25. Fibre Controller Options Dialog Box
Click the Fibre button in the Controller Options dialog box to open the Fibre
Controller Options dialog box. See Figures 4-22 and 4-25.
In the Fibre Controller Options dialog box, you have the option to do any of the
following:
Set these options by Enabling (checking) or Disabling (un-checking) the option.
• Enable Node Name Retention - When enabled, each controller shares its
node name with its partner controller and those names are used through all
phases of failover and failback.