Owner's manual

Chapter 3
Installing UPS Software
15
{drive}:\PWA\WINNT\DISK1\SETUP.EXE
where {drive} is the letter of the CD-ROM drive.
4. Follow the instructions on the screen.
◊ You will be prompted to identify an installation path for the software.
◊ In the Installation Options window, select PowerWise Assistant (user
interface only).
To Install the UPS Manager Application
Optionally, you can install the HP PowerWise Manager application on the
central management console running HP OpenView for Windows or NetServer
Assistant.
1. If the server’s CD-ROM drive is accessible, keep the CD-ROM at its
present location. Otherwise, put the HP NetServer Navigator CD-ROM in
the CD-ROM drive of the central management console. If you do not have
access to another CD-ROM drive, run the installation procedure to create
installation diskettes.
2. In the Windows NT Program Manager, select Run from the File drop-down
menu.
3. At the Command Line prompt, type the following:
{drive}:\PWA\WINNT\DISK1\SETUP.EXE
where {drive} is the letter of the CD-ROM drive.
4. Follow the instructions on the screen.
◊ You will be prompted to identify an installation path for the software.
◊ In the Installation Options window, select PowerWise Manager.
UPS Installation for Novell NetWare
NOTE Refer to the UPS README file for any updates to the
installation procedure. The file is located on the HP NetServer
Navigator CD-ROM in the \pwa\ netware \disk1 directory.
If you do not have a client with Windows to manage the HP
PowerWise UPS, refer to the UPS README file for the