Owner's manual

Chapter 3

Installing UPS Software

3. At the Command Line prompt, type the following:

{drive}:\PWA\NETWARE\DISK1\SETUP.EXE

where {drive} is the letter of the CD-ROM drive.

4. Follow the instructions on the screen.

◊ You will be prompted to identify an installation path for the software.

◊ In the Installation Options window, select PowerWise Assistant.

◊ You will need to identify the server as a Master or a Slave. For the

Master server, you must identify the port on the server to which the HP

PowerWise UPS is connected. For a Slave server, you must provide

the name of the Master.

5. Depending on your installation choices, one or more of the following

commands are added to the AUTOEXEC.NCF file:

load aiocomx

load hpups

load hpslave

load hpupscag

load hpupssd

Either reboot the server to load these files, or manually load them by

entering pwaload at the server console.