User's Manual
Table Of Contents
- HP Remote Insight Lights-Out Edition II User Guide
- Notice
- Contents
- Operational overview
- Installing the RILOE II
- Configuring the RILOE II
- Using the RILOE II
- Accessing RILOE II for the first time
- Features of the RILOE II
- Managing the user and configuration settings of the RILOE II
- Using the Remote Console
- Terminal Services pass-through option
- Using virtual devices
- Resetting the RILOE II to the factory default settings
- Getting help
- Pocket PC access with RILOE II
- RILOE II security
- Systems Insight Manager integration
- Directory services
- Overview of directory integration
- Benefits of directory integration
- How directory integration works
- Advantages and disadvantages of schema-free and HP Extended
- Setup for Schema-free directory integration
- Setting up HP schema directory integration
- Features supported by HP schema directory integration
- Setting up directory services
- Directory services support
- Schema required software
- Schema installer
- Management snap-in installer
- Directory services for Active Directory
- Active Directory Lights-Out management
- Directory services for eDirectory
- User login using directory services
- Directory settings
- Directory-enabled remote management
- Scripting, command line, and utility options
- Overview of the Lights-Out DOS utility
- Lights-Out directories migration utilities
- Compatibility
- Pre-migration checklist
- HP Lights-Out directory package
- HPQLOMIG operation
- Finding management processors
- Upgrading firmware on management processors
- Selecting a directory access method
- Naming management processors
- Configuring directories when HP Extended schema is selected
- Configuring directories when schema-free integration is sele
- Setting up management processors for directories
- HPQLOMGC operation
- Lights-Out Configuration Utility
- Using Perl with the XML scripting interface
- HPONCFG
- Remote Insight command language
- RIBCL sample scripts
- RIBCL general guidelines
- XML header
- Data types
- Response definitions
- RIBCL
- LOGIN
- USER_INFO
- ADD_USER
- DELETE_USER
- GET_USER
- MOD_USER
- GET_ALL_USERS
- GET_ALL_USER_INFO
- RIB_INFO
- RESET_RIB
- GET_NETWORK_SETTINGS
- MOD_NETWORK_SETTINGS
- GET_GLOBAL_SETTINGS
- MOD_GLOBAL_SETTINGS
- CLEAR_EVENTLOG
- UPDATE_RIB_FIRMWARE
- GET_FW_VERSION
- HOTKEY_CONFIG
- DIR_INFO
- GET_DIR_CONFIG
- MOD_DIR_CONFIG
- SERVER_INFO
- RESET_SERVER
- INSERT_VIRTUAL_FLOPPY
- EJECT_VIRTUAL_FLOPPY
- COPY_VIRTUAL_FLOPPY
- GET_VF_STATUS
- SET_VF_STATUS
- GET_HOST_POWER_STATUS
- SET_HOST_POWER
- GET_VPB_CABLE_STATUS
- GET_ALL_CABLES_STATUS
- GET_TWOFACTOR_SETTINGS
- MOD_TWOFACTOR_SETTINGS
- Troubleshooting the RILOE II
- Supported client operating systems and browsers
- Supported hardware and software
- Server PCI Slot and Cable Matrix
- Network connection problems
- Alert and trap problems
- NetWare initialization errors
- Miscellaneous problems
- Accessing System Partition Utilities
- Inability to reboot the server
- Inability to upgrade the RILOE II firmware
- Incorrect time or date of entries in the event log
- Interpreting LED indicators
- Invalid Source IP address
- Login name and password problems
- Remote Console mouse control issue
- Resetting the RILOE II to Factory Default Settings
- Virtual Floppy media applet is unresponsive
- Video Problems
- Troubleshooting the host server
- Directory Services errors
- Directory Services schema
- Technical support
- Regulatory compliance notices
- Acronyms and abbreviations
- Index
Scripting, command line, and utility options 133
•
The device will not accept additional XML tags after a syntax error occurs. To send additional XML,
a new connection must be established.
HPONCFG
The HPONCFG utility is an online configuration tool used to set up and configure the iLO management
processor and RILOE II from within the Windows® and Linux operating systems without requiring a reboot
of the server operating system. The utility runs in a command line mode and must be executed from an
operating system command line using an account with administrator or root access.
HPONCFG supported operating systems
HPONCFG is supported on:
• Windows® 2000 Server
• Windows® 2003 Server
• Red Hat Linux Enterprise Linux 2.1
• Red Hat Linux Enterprise Linux 3.0
• United Linux 1.0/SUSE LINUX Enterprise Server 8
HPONCFG requirements
• iLO management processor-based server
For an iLO management processor-based server, the server must have the RILOE II Management
Interface Driver loaded. The SmartStart operating system install process normally installs this driver.
During execution, HPONCFG will warn if it cannot find the driver. If the driver is not installed, it must
be downloaded and installed on the server: You can download the driver from the HP website
(http://h18023.www1.hp.com/support/files/lights-out/us/locate/20_5867.html#0
).
For iLO management processor-based servers, HPONCFG requires iLO management processor
firmware version 1.41 or later.
• RILOE II-based server
For RILOE II-based servers, the server must have the RILOE II Management Interface Driver loaded.
During execution, HPONCFG will warn if it cannot find the driver. If the driver is not installed, it must
be downloaded and installed on the server. You can download the driver from the HP website
(http://h18023.www1.hp.com/support/files/lights-out/us/locate/20_5868.html
).
For RILOE II-based servers, HPONCFG requires RILOE II firmware version 1.13 or later. For a server
Windows® 2000/Windows® 2003, it requires RILOE II Management Interface Driver version
3.2.1.0 or later.
• All servers
For both iLO management processor-based servers and RILOE II-based servers, the server must have
sm2user.dll loaded. This file is automatically loaded along with the HP Insight Management Agents.
During execution, HPONCFG will warn if it cannot find the sm2user.dll file. This file can be installed
separately from the component HP Insight Management Agents for Windows® 2000/Windows®
Server 2003, that can be downloaded as a part of the ProLiant Support Pack on the HP website
(http://h18004.www1.hp.com/support/files/server/us/download/18416.html
).
After downloading the ProLiant Support Pack, extract its contents to a temporary directory. In the
temporary directory, locate CP004791.exe. Extract the contents of this component to a temporary
directory. In the temporary directory, locate the subdirectory cqmgserv. The sm2user.dll file can be
found in this subdirectory. Copy the sm2user.dll file to the following directory on the server:
Winnt\system32\