User's Manual
Table Of Contents
- HP Remote Insight Lights-Out Edition II User Guide
- Notice
- Contents
- Operational overview
- Installing the RILOE II
- Configuring the RILOE II
- Using the RILOE II
- Accessing RILOE II for the first time
- Features of the RILOE II
- Managing the user and configuration settings of the RILOE II
- Using the Remote Console
- Terminal Services pass-through option
- Using virtual devices
- Resetting the RILOE II to the factory default settings
- Getting help
- Pocket PC access with RILOE II
- RILOE II security
- Systems Insight Manager integration
- Directory services
- Overview of directory integration
- Benefits of directory integration
- How directory integration works
- Advantages and disadvantages of schema-free and HP Extended
- Setup for Schema-free directory integration
- Setting up HP schema directory integration
- Features supported by HP schema directory integration
- Setting up directory services
- Directory services support
- Schema required software
- Schema installer
- Management snap-in installer
- Directory services for Active Directory
- Active Directory Lights-Out management
- Directory services for eDirectory
- User login using directory services
- Directory settings
- Directory-enabled remote management
- Scripting, command line, and utility options
- Overview of the Lights-Out DOS utility
- Lights-Out directories migration utilities
- Compatibility
- Pre-migration checklist
- HP Lights-Out directory package
- HPQLOMIG operation
- Finding management processors
- Upgrading firmware on management processors
- Selecting a directory access method
- Naming management processors
- Configuring directories when HP Extended schema is selected
- Configuring directories when schema-free integration is sele
- Setting up management processors for directories
- HPQLOMGC operation
- Lights-Out Configuration Utility
- Using Perl with the XML scripting interface
- HPONCFG
- Remote Insight command language
- RIBCL sample scripts
- RIBCL general guidelines
- XML header
- Data types
- Response definitions
- RIBCL
- LOGIN
- USER_INFO
- ADD_USER
- DELETE_USER
- GET_USER
- MOD_USER
- GET_ALL_USERS
- GET_ALL_USER_INFO
- RIB_INFO
- RESET_RIB
- GET_NETWORK_SETTINGS
- MOD_NETWORK_SETTINGS
- GET_GLOBAL_SETTINGS
- MOD_GLOBAL_SETTINGS
- CLEAR_EVENTLOG
- UPDATE_RIB_FIRMWARE
- GET_FW_VERSION
- HOTKEY_CONFIG
- DIR_INFO
- GET_DIR_CONFIG
- MOD_DIR_CONFIG
- SERVER_INFO
- RESET_SERVER
- INSERT_VIRTUAL_FLOPPY
- EJECT_VIRTUAL_FLOPPY
- COPY_VIRTUAL_FLOPPY
- GET_VF_STATUS
- SET_VF_STATUS
- GET_HOST_POWER_STATUS
- SET_HOST_POWER
- GET_VPB_CABLE_STATUS
- GET_ALL_CABLES_STATUS
- GET_TWOFACTOR_SETTINGS
- MOD_TWOFACTOR_SETTINGS
- Troubleshooting the RILOE II
- Supported client operating systems and browsers
- Supported hardware and software
- Server PCI Slot and Cable Matrix
- Network connection problems
- Alert and trap problems
- NetWare initialization errors
- Miscellaneous problems
- Accessing System Partition Utilities
- Inability to reboot the server
- Inability to upgrade the RILOE II firmware
- Incorrect time or date of entries in the event log
- Interpreting LED indicators
- Invalid Source IP address
- Login name and password problems
- Remote Console mouse control issue
- Resetting the RILOE II to Factory Default Settings
- Virtual Floppy media applet is unresponsive
- Video Problems
- Troubleshooting the host server
- Directory Services errors
- Directory Services schema
- Technical support
- Regulatory compliance notices
- Acronyms and abbreviations
- Index
Installing the RILOE II 14
Installing a Virtual Power Button cable (4-pin)
To enable the Virtual Power Button feature of the RILOE II on servers that use a four-pin connector on the
server system board, install the Virtual Power Button cable (4-pin) (PN 160011-001):
1. Power down the server and disconnect all power cords to remove power from the server.
2. Connect the four-pin connector on the cable to the Virtual Power Button cable connector, located on
the rear of the RILOE II.
3. Connect the four-pin connector on the other end of the cable into the four-pin connector on the server
system board.
IMPORTANT: Be sure that you do not connect the Virtual Power Button cable to the speaker connection on
the server system board.
NOTE: For detailed instructions on the location of the connector on the server system board, refer to the
documentation provided with the server.
4. Refer to the server documentation to reassemble the server.
Installing a Remote Insight cable (16-pin)
To install the Remote Insight cable (16-pin) (P/N 177634-001):
1. Power down the server and disconnect all power cords to remove power from the server.
2. Connect the 16-pin connector on the Remote Insight internal cable to the Remote Insight connector
(16-pin), located on the edge of the board.
3. Connect the 16-pin connector on the other end of the Remote Insight internal cable to the 16-pin
Remote Insight connector on the server system board.
NOTE: For detailed instructions on the location of the connector on the server system board, refer to the
documentation provided with the server.
4. Refer to the server documentation to reassemble the server.
Installing a Remote Insight cable (30-pin)
To install the Remote Insight cable (30-pin) (P/N 241793-010):
1. Power down the server and disconnect all power cords to remove power from the server.
2. Connect the 30-pin connector on the Remote Insight cable to the Remote Insight connector (30-pin),
located on the edge of the board.
3. Connect the 30-pin connector on the other end of the Remote Insight cable to the 30-pin Remote
Insight connector on the server system board.
NOTE: For detailed instructions on the location of the connector on the server system board, refer to the
documentation provided with the server.
4. Refer to the server documentation to reassemble the server.
Connecting external cables to RILOE II
After installing RILOE II in your server, connect the external cables. During normal operation, the RILOE II
passes the keyboard and mouse signals to the server and functions as the primary video controller. This
configuration allows the following operations to occur:
• Transparent substitution of a remote keyboard and mouse for the server keyboard and mouse