User's Manual
Table Of Contents
- HP Remote Insight Lights-Out Edition II User Guide
- Notice
- Contents
- Operational overview
- Installing the RILOE II
- Configuring the RILOE II
- Using the RILOE II
- Accessing RILOE II for the first time
- Features of the RILOE II
- Managing the user and configuration settings of the RILOE II
- Using the Remote Console
- Terminal Services pass-through option
- Using virtual devices
- Resetting the RILOE II to the factory default settings
- Getting help
- Pocket PC access with RILOE II
- RILOE II security
- Systems Insight Manager integration
- Directory services
- Overview of directory integration
- Benefits of directory integration
- How directory integration works
- Advantages and disadvantages of schema-free and HP Extended
- Setup for Schema-free directory integration
- Setting up HP schema directory integration
- Features supported by HP schema directory integration
- Setting up directory services
- Directory services support
- Schema required software
- Schema installer
- Management snap-in installer
- Directory services for Active Directory
- Active Directory Lights-Out management
- Directory services for eDirectory
- User login using directory services
- Directory settings
- Directory-enabled remote management
- Scripting, command line, and utility options
- Overview of the Lights-Out DOS utility
- Lights-Out directories migration utilities
- Compatibility
- Pre-migration checklist
- HP Lights-Out directory package
- HPQLOMIG operation
- Finding management processors
- Upgrading firmware on management processors
- Selecting a directory access method
- Naming management processors
- Configuring directories when HP Extended schema is selected
- Configuring directories when schema-free integration is sele
- Setting up management processors for directories
- HPQLOMGC operation
- Lights-Out Configuration Utility
- Using Perl with the XML scripting interface
- HPONCFG
- Remote Insight command language
- RIBCL sample scripts
- RIBCL general guidelines
- XML header
- Data types
- Response definitions
- RIBCL
- LOGIN
- USER_INFO
- ADD_USER
- DELETE_USER
- GET_USER
- MOD_USER
- GET_ALL_USERS
- GET_ALL_USER_INFO
- RIB_INFO
- RESET_RIB
- GET_NETWORK_SETTINGS
- MOD_NETWORK_SETTINGS
- GET_GLOBAL_SETTINGS
- MOD_GLOBAL_SETTINGS
- CLEAR_EVENTLOG
- UPDATE_RIB_FIRMWARE
- GET_FW_VERSION
- HOTKEY_CONFIG
- DIR_INFO
- GET_DIR_CONFIG
- MOD_DIR_CONFIG
- SERVER_INFO
- RESET_SERVER
- INSERT_VIRTUAL_FLOPPY
- EJECT_VIRTUAL_FLOPPY
- COPY_VIRTUAL_FLOPPY
- GET_VF_STATUS
- SET_VF_STATUS
- GET_HOST_POWER_STATUS
- SET_HOST_POWER
- GET_VPB_CABLE_STATUS
- GET_ALL_CABLES_STATUS
- GET_TWOFACTOR_SETTINGS
- MOD_TWOFACTOR_SETTINGS
- Troubleshooting the RILOE II
- Supported client operating systems and browsers
- Supported hardware and software
- Server PCI Slot and Cable Matrix
- Network connection problems
- Alert and trap problems
- NetWare initialization errors
- Miscellaneous problems
- Accessing System Partition Utilities
- Inability to reboot the server
- Inability to upgrade the RILOE II firmware
- Incorrect time or date of entries in the event log
- Interpreting LED indicators
- Invalid Source IP address
- Login name and password problems
- Remote Console mouse control issue
- Resetting the RILOE II to Factory Default Settings
- Virtual Floppy media applet is unresponsive
- Video Problems
- Troubleshooting the host server
- Directory Services errors
- Directory Services schema
- Technical support
- Regulatory compliance notices
- Acronyms and abbreviations
- Index
Configuring the RILOE II 20
3.
Make and save any necessary changes to the RILOE II.
4. Exit the RBSU.
SmartStart setup of RILOE II
Use RBSU F8 during SmartStart to configure the RILOE II. Configuring the RILOE II using SmartStart is not
an option.
Installing RILOE II device drivers
The RILOE II Management Interface Driver enables system software, such as SNMP Insight Agents and the
Terminal Services pass-through service, to communicate with RILOE II.
The device drivers required to support RILOE II are part of the PSP located on the SmartStart CD or the,
Management CD, or on the HP website (http://www.hp.com/servers/lights-out
).
All the support drivers for your server and RILOE II can be downloaded from the HP website
(http://www.hp.com/servers/lights-out
).
To download the device drivers:
1. Click the RILOE II graphic.
2. Select Software and Drivers.
Microsoft device driver support
The device drivers that support the RILOE II are part of the PSP that is located on the HP website
(http://www.hp.com/support
) or on the SmartStart CD. Before you install the Windows® drivers, obtain
the Windows® documentation and the latest Windows® Service Pack.
RILOE II prerequisite files:
• CPQCIDRV.SYS provides the RILOE II Management Interface Driver support.
• CPQASM2.SYS, SYSMGMT.SYS, and SYSDOWN.SYS provide the RILOE II Advanced Server
Management Controller Driver support.
PSP for Microsoft® Windows® products includes an installer that analyzes system requirements and
installs all drivers. The PSP is available on the HP website (http://www.hp.com/support
) or on the
SmartStart CD.
To install the drivers in the PSP:
1. Download the PSP from the HP website (http://www.hp.com/support).
2. Run the SETUP.EXE file included in the download, and follow the installation instructions.
For additional information about the PSP installation, read the text file included in the PSP download.
Novell NetWare device driver support
The device drivers required to support RILOE II are part of the PSP that is located on the SmartStart CD
and the HP website (http://www.hp.com/support
).The PSP for Novell NetWare includes an installer that
analyzes system requirements and installs all drivers.
RILOE II prerequisite files:
• The CPQHLTH.NLM file provides the Health Driver for Novell NetWare.
• The CPQCI.NLM file provides RILOE II Management Interface Driver support.