User's Manual
Table Of Contents
- HP Remote Insight Lights-Out Edition II User Guide
- Notice
- Contents
- Operational overview
- Installing the RILOE II
- Configuring the RILOE II
- Using the RILOE II
- Accessing RILOE II for the first time
- Features of the RILOE II
- Managing the user and configuration settings of the RILOE II
- Using the Remote Console
- Terminal Services pass-through option
- Using virtual devices
- Resetting the RILOE II to the factory default settings
- Getting help
- Pocket PC access with RILOE II
- RILOE II security
- Systems Insight Manager integration
- Directory services
- Overview of directory integration
- Benefits of directory integration
- How directory integration works
- Advantages and disadvantages of schema-free and HP Extended
- Setup for Schema-free directory integration
- Setting up HP schema directory integration
- Features supported by HP schema directory integration
- Setting up directory services
- Directory services support
- Schema required software
- Schema installer
- Management snap-in installer
- Directory services for Active Directory
- Active Directory Lights-Out management
- Directory services for eDirectory
- User login using directory services
- Directory settings
- Directory-enabled remote management
- Scripting, command line, and utility options
- Overview of the Lights-Out DOS utility
- Lights-Out directories migration utilities
- Compatibility
- Pre-migration checklist
- HP Lights-Out directory package
- HPQLOMIG operation
- Finding management processors
- Upgrading firmware on management processors
- Selecting a directory access method
- Naming management processors
- Configuring directories when HP Extended schema is selected
- Configuring directories when schema-free integration is sele
- Setting up management processors for directories
- HPQLOMGC operation
- Lights-Out Configuration Utility
- Using Perl with the XML scripting interface
- HPONCFG
- Remote Insight command language
- RIBCL sample scripts
- RIBCL general guidelines
- XML header
- Data types
- Response definitions
- RIBCL
- LOGIN
- USER_INFO
- ADD_USER
- DELETE_USER
- GET_USER
- MOD_USER
- GET_ALL_USERS
- GET_ALL_USER_INFO
- RIB_INFO
- RESET_RIB
- GET_NETWORK_SETTINGS
- MOD_NETWORK_SETTINGS
- GET_GLOBAL_SETTINGS
- MOD_GLOBAL_SETTINGS
- CLEAR_EVENTLOG
- UPDATE_RIB_FIRMWARE
- GET_FW_VERSION
- HOTKEY_CONFIG
- DIR_INFO
- GET_DIR_CONFIG
- MOD_DIR_CONFIG
- SERVER_INFO
- RESET_SERVER
- INSERT_VIRTUAL_FLOPPY
- EJECT_VIRTUAL_FLOPPY
- COPY_VIRTUAL_FLOPPY
- GET_VF_STATUS
- SET_VF_STATUS
- GET_HOST_POWER_STATUS
- SET_HOST_POWER
- GET_VPB_CABLE_STATUS
- GET_ALL_CABLES_STATUS
- GET_TWOFACTOR_SETTINGS
- MOD_TWOFACTOR_SETTINGS
- Troubleshooting the RILOE II
- Supported client operating systems and browsers
- Supported hardware and software
- Server PCI Slot and Cable Matrix
- Network connection problems
- Alert and trap problems
- NetWare initialization errors
- Miscellaneous problems
- Accessing System Partition Utilities
- Inability to reboot the server
- Inability to upgrade the RILOE II firmware
- Incorrect time or date of entries in the event log
- Interpreting LED indicators
- Invalid Source IP address
- Login name and password problems
- Remote Console mouse control issue
- Resetting the RILOE II to Factory Default Settings
- Virtual Floppy media applet is unresponsive
- Video Problems
- Troubleshooting the host server
- Directory Services errors
- Directory Services schema
- Technical support
- Regulatory compliance notices
- Acronyms and abbreviations
- Index
Directory services 78
<DIR_GRPACCT1_NAME value
="CN=Administrators,CN=Builtin,DC=HP,DC=com "/>
<DIR_GRPACCT1_PRIV value = "1"/>
</MOD_DIR_CONFIG>
</DIR_INFO>
</LOGIN>
</RIBCL>
Schema-free HPLOMIG-based setup
HPLOMIG is the easiest way to set up a large number of LOM processors for directories. To use
HPLOMIG, download the HPQLOMIG utility and additional documentation from the HP website
(http://www.hp.com/servers/lights-out
). HP recommends using HPLOMIG when configuring many LOM
processors for directories. For more information on using HPLOMIG, refer to the "HPLOMIG Operation"
section.
Schema-free setup options
Setup options are the same regardless of which method (browser, HPQLOMIG, or script) you use to
configure the directory.
After enabling directories and selecting the Schema-free option, you have the following options.
Minimum Login Flexibility
• Enter the directory server’s DNS name or IP address and LDAP port. Typically, the LDAP port for an
SSL connection is 636.
• Enter the distinguished name for at least one group. The chosen group can be a security group (for
example CN=Administrators,CN=Builtin,DC=HP,DC=com) or any other group as long as the
intended RILOE II users are members of the group.
With a minimum configuration, you can log into RILOE II using your full distinguished name and
password. You must be a member of a group that RILOE II recognizes.
Better Login Flexibility
• In addition to the minimum settings, enter at least one directory user context.
At login time, the login name and user context are combined to make the user's distinguished name.
For instance, if the user logs in as JOHN.SMITH and a user context is set up as
CN=USERS,DC=HP,DC=COM, then the distinguished name that RILOE II tries will be
CN=JOHN.SMITH,CN=USERS,DC=HP,DC=COM.
Maximum Login Flexibility
• Configure RILOE II as described in the minimum and better login flexibility options.
• Configure RILOE II with a DNS name, not an IP address for the directory server's network address.
The DNS name must be resolvable to an IP address from both RILOE II and the client system.
• Enable ActiveX controls in your browser. The RILOE II login script will attempt to call a Windows®
control to convert the login name to a distinguished name.
Configuring RILOE II with maximum login flexibility enables you to log in using your full distinguished
name and password, your name as it appears in the directory, NetBIOS format
(domain\login_name), or the e-mail format (login_name@domain).
NOTE: Your system security settings or installed software might prevent the login script from calling the
Windows® ActiveX control. If this happens, your browser displays a warning message in the status bar,
message box, or might stop responding. To help identify what software or setting is causing the problem,
create another profile and log in to the system.