Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products Abstract This document contains safety precautions, environmental notices, and regulatory compliance notices for HP Enterprise products.
© Copyright 2012, 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Contents 1 Safety precautions......................................................................................5 General precautions.................................................................................................................5 Symbols on equipment..............................................................................................................5 Precautions for maintaining and servicing products.......................................................................
BSMI notices.....................................................................................................................23 Class A EMI warning message........................................................................................23 UPS (less than 16A output current)...................................................................................23 UPS (greater than 16A output current)..............................................................................
1 Safety precautions Retain and follow all product safety and operating instructions. Always refer to the documentation (printed or electronic) supplied with your product. If there is a conflict between this document and the product documentation, the product documentation takes precedence. Observe all warnings on the product and in the operating instructions to reduce the risk of bodily injury, electric shock, fire, and damage to the equipment. General precautions CAUTION: personnel.
This symbol on an RJ-45 receptacle indicates a Network Interface Connection. WARNING: To reduce risk of electric shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into this receptacle. This symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before touching.
• Some products have covers or doors to access hot-plug components and may allow access to hazardous energy circuits or moving fans. ◦ The doors should remain locked during normal operation. OR ◦ The server should be installed in a controlled access location where only qualified personnel have access to the server. • Power down the equipment and disconnect all AC power cords before removing any access covers for non-hot-plug areas.
Power supplies Hot-plug power supplies are not designed to be removed or installed with AC power connected to the power supply. To reduce the risk of electric shock or damage to the equipment when handling hot-plug power supplies: • Install the power supply before connecting the power cord to the power supply. • Unplug the power cord before removing the power supply from the product.
• • • ◦ For rack installations, do not exceed the maximum number of UPS products in any single equipment rack. ◦ For rack installations, install the UPS only at the bottom of a rack. To reduce the risk of personal injury or damage to equipment when installing a Remote Emergency Power Off (REPO) port: ◦ The REPO port must be wired by a licensed electrician. ◦ Verify that the main AC power disconnect device for the UPS is locked and/or tagged in the OFF position before wiring the REPO port.
• Pluggable PDUs must be disconnected from the product and unplugged from the AC electrical outlet before servicing or replacing the product. • Do not overload the output of PDUs. The total connected load should not exceed rated input power. • To reduce the risk of electric shock due to high leakage currents, ensure that there is a reliable grounded (earthed) connection before connecting power distribution products to AC power.
• Treat all assemblies, components, and interface connections as static sensitive. • Avoid working in carpeted areas and keep body movement to a minimum while removing or installing boards to minimize buildup of static charge. Voltage selection • On products that have voltage select switches, make sure that the switch is set for the type of voltage you use (115 VAC or 230 VAC). • Do not attempt to power the product with voltage converter kits sold for appliances.
• Load the rack from the bottom up, starting with the heaviest component. • Ensure that the component is properly mated with the rails, or the rails may be unstable. • Do not attempt to move a fully loaded rack. Remove components from the rack before moving it. • Do not attempt to move a rack on an incline that is greater than 10 degrees from horizontal. Cabinet safety WARNING! Cabinets are heavy even when empty.
2 Environmental notices HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. For HP product environmental and safety information and compliance data, including RoHS and REACH, see www.hp.com/go/ecodata.
Country EU WEEE Directive Page Sweden http://h41111.www4.hp.com/globalcitizenship/se/sv/environment/recycle/hardwarerecycle.html Switzerland (DE) http://h41111.www4.hp.com/globalcitizenship/ch/de/environment/recycle/hardwarerecycle.html Switzerland (FR) http://h41111.www4.hp.com/globalcitizenship/ch/fr/environment/recycle/hardwarerecycle.html United Kingdom http://h41111.www4.hp.com/globalcitizenship/uk/en/environment/recycle/hardwarerecycle.
Battery replacement notices 15
Environmental notices
RoHS material content declarations China RoHS material content declaration Chinese version: http://www8.hp.com/us/en/hp-information/environment/chinarohs.html English version: http://www8.hp.com/us/en/hp-information/environment/chinarohs-english.
European Union Commission Regulation 1275/2008 The power data for affected products—including the power consumption of the product in networked standby if all wired network ports are connected and all wireless network ports are activated—is provided in section P14, “Additional information,” of the product IT ECO Declaration available at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/iteconetworking.html.
3 Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this regulatory model number.
Declaration of Conformity for products marked with the FCC logo (United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, contact us by mail or telephone: • Hewlett-Packard Company P. O.
Trusted Platform Module (TPM) – China Import Restrictions HP SPECIAL REMINDER: Before enabling TPM functionality on this system, you must ensure that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable. For any compliance issues arising from your operation/usage of TPM which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely.
Notices for Japan VCCI notice Power cord statement Notices for Korea Class A equipment Class B equipment 22 Regulatory compliance notices
Notices for Taiwan BSMI notices Class A EMI warning message UPS (less than 16A output current) UPS (greater than 16A output current) Belarus Kazakhstan Russia marking Manufacturer and Local Representative Information Manufacturer’s information: • Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, California 94304, U.S. Local Representative information Russian: • HP Russia: ЗАО “Хьюлетт-Паккард А.О.”, 125171, Россия, г. Москва, Ленинградское шоссе, 16А, стр.
Local Representative information Kazakh: • HP Kazakhstan: ЖШС «Хьюлетт-Паккард (К)», Қазақстан, Алматы қ., Бостандық ауданы, Тимирязев к-сі, 28В, тел./факс: +7 (727) 355 35 50, +7 (727) 355 35 51 Manufacturing date: The manufacturing date is defined by the serial number.
Mexican notice La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. Taiwanese notice Laser compliance notices This device may contain a laser that is classified as a Class 1 Laser Product in accordance with U.S. FDA regulations and the IEC 60825-1.
Regulatory compliance notices
Laser compliance notices 27
Index B G batteries replacement notices, 14 safety precautions, 9, 11 Belarus Kazakhstan Russia EAC marking, 23 BSMI notices, 23 grounding earth leakage current, 10 ESD, 10 safety precautions, 10 C laser compliance notices, 25 cabinet safety, 12 CE compliance marking European Union Regulatory Notice, 21 China import restrictions Trusted Platform Module (TPM), 21 China RoHS material content declaration, 17 D Declaration of Conformity European Union Regulatory Notice, 21 products marked with FCC logo (
Remote Emergency Power Off (REPO) port safety precautions, 9 RoHS material content declarations China, 17 Turkey, 17 Ukraine, 17 S safety precautions, 5 batteries, 9, 11 cabinets, 12 fuse replacement, 11 general, 5 grounding, 10 maintaining and servicing products, 6 modems, 12 modems, telecommunications, or LAN options, 12 PDUs, 9 power cords, 7 power products, 7 power supplies, 8 products installed in racks and cabinets, 11 REPO port, 9 telecommunications equipment, 12 UPS, 8 voltage selection, 11 substan
