Intel® Centrino® 2 with vPro™ technology Setup and Configuration for HP Business Notebook PCs
12
Recommended Setting : Network Interface Enabled
i. Select N.
If network is disabled, then all remote AMT capabilities are disabled and
TCP/IP settings will not be necessary.
This option is a toggle, the next time it is accessed the opposite setting is
prompted.
a. DHCP Disable
Default Setting : DHCP Enabled
Recommended Setting : User Dependent
i. Select N.
For the purpose of this whitepaper, DHCP is enabled.
17) Go into Provisioning Server.
a. Enter Provisioning Server IP
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
b. Enter Port
Default Setting : 9971
Recommended Setting : S&CS Dependent
This option is used in Enterprise mode when an Intel AMT Setup and Configuration
(Provisioning) Server is available. It points to the IP address of the S&CS.
If the IP and port is left as the default, the ME will look for “ProvisionServer” on DNS at port
9971.
Some ISV’s may require additional settings, such as the SC&S port number and SC&S IP
address. Contact your Management Console ISV for more details.
18) Check Provision Model.
a. Change to Small Business
Default Setting : Enterprise
Recommended Setting : Enterprise
i. Select N.
b. Return to previous menu.
19) For AMT 2.x, go into Set PID and PPS. For AMT 4.x, go to Setup and Configuration => TLS
PSK => Set PID and PPS
Default Setting : None
Recommended Setting : System Dependent
This option is for Provisioning ID (PID) and Provisioning Passphrase (PPS) entry. PIDs are 8
characters and PPS are 32 characters. There are dashes between every set of four characters