HP Workstations - Dual-port NIC installation

Step 1—Preparing the workstation
Introduction
This section describes how to prepare your workstation for NIC installation.
Procedure: Preparing the workstation
To prepare the workstation for component installation, use the following procedure.
Table 1 Preparing the workstation
Step Action
1 Download the latest BIOS and driver updates for your workstation from http://www.hp.com/go/
workstationsupport.
2 Install the downloaded BIOS and driver updates on your workstation.
3 Power down the workstation.
4 Disconnect power from the workstation.
5 Remove the access cover.
Additional information
For product-specific component information, see the Service and Technical Reference Guide for your
HP workstation at
http://www.hp.com/support/workstation_manuals.
ENWW Step 1—Preparing the workstation 3