HP xw4600, xw6600, and xw8600 Workstations - Setting up SATA RAID

2. Using the arrow keys and the Enter key go to “Storage” and then “Storage Options.” SATA
Emulation mode must be set to “RAID” or “RAID+AHCI” depending on your system, see Figure 1.
Make sure press to press the F10 key to accept any changes you make.
Figure 1 SATA Emulation mode and eSATA SPEED Setup
2 Setting up SATA RAID on the HP xw4600, xw6600, and xw8600 Workstations ENWW