HP xw4600, xw6600, and xw8600 Workstations - Setting up SATA RAID

3. Next, arrow over to the “Advanced” tab and select “Device Options.” SATA RAID Option ROM
Download” must be set to “Enable” see Figure 2. If you are NOT using eSATA drives skip step 4.
and continue with step 5.
Figure 2 SATA RAID Option ROM Enable
4. If eSATA drives are used then the speed must be changed to Gen1/1.5Gbps.
5. Leave all other settings as currently set. Exit the BIOS by arrowing over to “File” and selecting
“Save Changes and Exit.” Press the F10 keyto accept all changes. The system will reboot.
Configuring the RAID volumes
1. Press the space bar once you see the HP logo splash screen at the beginning of the boot.
ENWW Configuring the RAID volumes 3