HP xw8600 and xw9400 Workstations - Nvidia Quadro FX5600 graphics card and auxiliary power adapter cable installation

Step 5—Installing the card support
To limit card movement in the chassis, install a card support. Hook the card support tabs in the notches
under the chassis lip, then push down on the card support to lock it into place.
NOTE: Your card support might look different. The following figure is for illustration purposes only.
Figure 8 Installing the card support bracket
Step 6—Reassembling the workstation
After installation, reassemble the workstation using the instructions in the workstation documentation.
The reassembly process involves reinstalling the side access panel and restoring power to the
workstation.
Step 7—Configuring the software
See the manufacturer's documentation shipped with the FX 5600 Quadro graphics card for instructions
on loading and setting up the graphics drivers. HP recommends you download the latest drivers for your
workstation model from
http://www.hp.com/go/workstationsupport.
ENWW Step 5—Installing the card support 7