Owner manual

SDR Commands
HP NonStop SQL DDL Replicator User’s Guide—545799-005
6-16
START UPDATE
cpu (in the range of 0 to 15) of the backup monitor processes. Used when the
monitor process is started.
EMSLEVEL { CRITICAL | DETAIL | NORMAL | TRACE }
sets the granularity of EMS event reporting:
CRITICAL displays only messages that are critical or that require operator
intervention.
DETAIL displays all EMS messages generated by the SDR monitor and SDR
updaters.
NORMAL displays essential informational messages, action messages and
critical messages. NORMAL is the default.
TRACE displays low level activity for problem analysis and should be used
only when advised by HP support.
HOMETERM file-name
specifies a home terminal for the monitor process. Used when the monitor
process is started.
PRIMARY cpu-number
cpu (in the range of 0 to 15) of the primary monitor processes. Used when the
monitor process is started.
PRIORITY process-priority
specifies the priority (in the range of 1 to 199) for the monitor process. Used
when the monitor process is started.
UPDATE { HOLD | OFF }
instructs the monitor to start (or not start) the SDR updaters.
If UPDATE HOLD is specified, the updaters are started in the HOLD state.
If UPDATE is omitted or UPDATE OFF is specified, the monitor does not start
the SDR updaters.
The default is OFF.
START UPDATE
Starts the SDR updater that manages the specified RDF configuration (or all SDR
updaters).
SDR updaters that are already executing are not affected by this command.
RDF-control-subvol
START UPDATE [ RDF-control-subvol ] [, HOLD ]