Owner's manual

Command Interpreter
HP AutoSYNC User’s Guide—522580-015
8-35
ALTER SYNCFILESET
Modifies the options of the syncfilesets in the specified fset-id range.
ALTER SYNCF[ILESET] fset-range [, fset-range ], ...
{, options... };
fset-range is { * | fset-id | fset-id - fset-id }
common-options:
{ AUTOSUSPEND | NO AUTOSUSPEND }
{ BATCHID batchid | NO BATCHID }
{ EXCLUDE exclude-file | NO EXCLUDE }
{ FROM file-set }
{ FROMO[NER] user-id | NO FROMO[NER] }
{ [IP]HOST[NAME] { tcpip-address | host-name }
| NO [IP]HOST[NAME] }
{ INTERVAL interval [ MINUTES | HOURS | DAYS ] | NO INTERVAL}
{ KEEPS[ECURITY] | NO KEEPS[ECURITY] }
{ KEEPB[ACKUPINFILE] | NO KEEPB[ACKUPINFILE] }
{ LISTA[LL] | NO LISTA[LL] }
{ OPENU[PDATE] interval [SECONDS|MINUTES|HOURS]
| NO OPENU[PDATE] }
{ OWNER { user-id | user-name } | NO OWNER }
{ PRI[ORITY] priority | NO PRI[ORITY] }
{ PURGE | NO PURGE }
{ RATE percentage | NO RATE }
{ START hh:mm:ss | NO START }
{ STOP hh:mm:ss | NO STOP }
{ SUSPEND }
{ TRIGGER { tacl-command | oss-shell-command }| NO TRIGGER }
{ TRIGGERONFILESET { tacl-command | oss-shell-command }
| NO TRIGGERONFILESET }