Owner's manual

Command Interpreter
HP AutoSYNC User’s Guide—522580-015
8-92
SUSPEND SYNCFILESET
SUSPEND SYNCFILESET
Stops the synchronization for a given file set. The synchronization operations can be
resumed by using the ACTIVATE SYNCFILESET command. Active synchronization is
stopped after the current file set is synchronized.
* | fset-id | fset-id - fset-id
identifies a synchronization file-set ID or a range of file-set IDs. Up to 32 ranges
can be entered.
If fset-id - fset-id is specified, the second fset-id must be greater than the
first.
* designates all configured syncfilesets for the syncuser.
To display the file set ID’s and BATCHIDs, use INFO SYNCFILESET.
SUSPEND SYNCUSER
Stops synchronization activity for the specified user. Active synchronization is stopped
after the current file set is synchronized.
user-id
a Guardian user ID or user name of a configured user.
ALLUSERS
designates all users.
SYNCHRONIZE
Executes a one time synchronization. Each eligible file in the source file set is copied
to the destination file set unless the same file (or a later version) is already present.
The following source files are not eligible for synchronization:
•
Audited files, unless AUDITED is specified
•
Partitioned files
•
Corrupt or broken files
•
Files opened exclusively
•
Files opened for update, unless OPENUPDATE is specified
SUSPEND SYNCF[ILESET] fset-range [, fset-range ] ,...;
fset-range is { * | fset-id | fset-id - fset-id }
SUSPEND SYNCU[SER] { user-id | ALLUSERS };