Owner's manual
Table Of Contents
- Title Page
- Contents
- What's New
- About This Manual
- 1 Overview of the Tape Library
- 2 Unpacking the Tape Library
- 3 Installing the Tape Library
- 4 Controls and Indicators on the CTL700 Tape Library
- 5 Configuring and Testing the Tape Library
- Overview of Configuration
- Tape Library Capacity
- Entering Configuration Data
- Performing the Final Steps
- Initialization Sequence
- Testing the Tape Library
- 6 Operating the Tape Library
- Operating in Automated Mode
- Powering Off the Tape Library
- Operating In Manual Mode
- 7 Tape Drives in the CTL700 Tape Library
- 8 Configuring the CTL700 Tape Library for the NonStop SSeries Server
- 9 Managing Tape Drives
- A Configuring the CTL700 Tape Library for the NonStop NS-Series Server
- B Configuring the CTL700 Tape Library for the NonStop SSeries Server With the IOAM Enclosure
- C Configuring the CTL700 Tape Library for the NonStop BladeSystem Server
- Safety and Compliance
- Index
Controls and Indicators on the CTL700 Tape Library
L700 (CTL700) Installation and User’s Guide—527338-008
4-10
Display Screens
This screen lets you set:
Drive Configuration
Accessible from the Main Configuration menu, the drive configuration menu lets you
modify portions of each drive’s configuration. Figure 4-10 shows an example screen.
For each drive, the menu displays the drive position, drive type, SCSI ID and indicates
whether the drive is on the same SCSI bus as the library.
The panel displays only 16 lines per screen. If the library contains more than eight
drives, use the down arrow button to scroll to drive 09 and higher. For more
information, see Entering Tape Drive Information on page 5-9.
SCSI ID Tape library’s SCSI identification number
Fast Load Fast Load feature on or off
Date Current date
Time Current time
SCSI Type Type of SCSI bus that connects the tape library to
the server
Auto Clean Whether Auto Clean is enabled
CAPs Number of CAPs installed
User Cells Number of data storage cells the library contains
Drive Column Number of tape drive columns installed
Expansion Frame Whether an expansion frame is installed
Note. The cursor position is saved on all screens that list the tape library’s tape drives.