Owner's manual

Operation
5243 Tape Drive Installation and User’s Guide—542758-003
3-4
Removing Tape Cartridges
Removing Tape Cartridges
1. Press the Eject button on the front panel.
2. The tape drive completes any task it is currently performing, winds the tape to the
beginning, and ejects the cartridge. The sequence takes about 25 seconds for a
write-enabled cartridge and 10 seconds for a write-protected cartridge.
Caution. Never try to remove a tape cartridge before it is fully ejected.
Figure 3-3. Ejecting a Cartridge
Caution. To ensure reliable operation, do not remove power from the tape drive during read,
write, fast-search, load, and unload activities.
Eject Button