Owner's manual

Operation
5243 Tape Drive Installation and User’s Guide—542758-003
3-6
Write-Protecting Cartridges
Write-Protecting Cartridges
If you want to protect the data on a cartridge from being altered or overwritten, you can
write-protect the cartridge.
Always remove the cartridge from the tape drive before you change the write
protection:
•
To write-protect a cartridge, slide the tab on the rear of the cartridge so that the
recognition hole is open.
•
To write-enable a cartridge, slide the tab back so that the hole is closed.
Figure 3-4. Write-Protecting a Cartridge
Note. Write-protection will not protect your cartridges against magnets (or bulk erasers).
1 2
1. Tab Closed, Cartridge Write-Enabled
2. Tab Open, Cartridge Write-Protected