Owner's manual

Using the SMM Utility Interface Program (INTFACE)

Silo Media Manager Installation and User’s Guide—541559-001

7-10

DRIVEREPORT Function

The DRIVEREPORT function of the utility program allows the reporting of tapes in the

tape drives.

Syntax:

Run <SMM ISV>.INTFACE/NAME/ DRIVEREPORT <qualified output

file> <SMM ISV location>

Example:

Run $SYSTEM.SMM.INTFACE/NAME/ DRIVEREPORT

$SYSTEM.OUTPUT.DRVLIST $SYSTEM.SMM

CAPREPORT is the function.

$SYSTEM.OUTPUT.DRVLIST is the output file for the listing.

$SYSTEM.SMM is the location of the SMM software on the

NonStop server. It can be any valid $volume.subvolume.

REFRESH Function

The REFRESH function allows a refresh of the library once 9840 labels have been

identified as 9840C tapes. Without this command SMM would have to be recycled.

This command is run after the ADDTAPE program is run and tape labels are either

added or deleted to/from 9840C support

Syntax:

Run <SMM ISV>.INTFACE/NAME/REFRESH>

Example:

Run $SYSTEM.SMM.INTFACE/NAME/REFRESH