Owner's manual

Silo Media Manager Installation and User’s Guide—541559-001
A-1
A Silo Media Manager Quick Start
Guide
INSTALL STEP 1
This section describes how to install the SMM software for your host system. The host
is the system that is attached to the tape library. This section discusses how to install
SMM from a CD as well as how to install SMM received via e-mail.
CD Version of SMM Software (Server)
1. Double-click on the GUI icon on the CD to install the GUI on your PC.
2. Rename the current SMM subvolume on the NonStop out of the way.
3. Start the GUI on your PC.
4. Choose the FTP function button.
5. Enter the IP number of the server system.
6. Enter the super.super password.
7. Enter the \system.$vol.subvol where you would like SMM to reside on the server.
8. Choose BROWSE and go to the CD, go to the SERVER directory on the CD.
9. Go to INSTALL STEP 2.
If you have NonStop clients (NonStop systems that will be using the tape drives in the
library, but that the library control path is not physically connected to), after doing the
above steps for the server, following the same steps, but instead of using the IP
number of the server, use the IP number(s) of your client NonStop(s) and go to the
CLIENT directory on the CD.