Manual

9710 SMM Installation and Users Guide

Appendix D -

CONFIG_DRIVE

When the main menu prompt returns, type CONFIG_DRIVE to configure a drive. Once

CONFIG_DRIVE is typed, the prompt will ask which drive to configure (1-10 from

bottom to top). Choose the drive to be configured. Enter the new name for the drive and

the new node. The new configuration will be shown and confirmation will be requested.

Type Y, if the new configuration is correct. The system will save the new configuration

and then ask if the continued configuration of drives is wanted. To continue configuring

drives, type Y and repeat the process. If drive configuration is finished, type N, and the

main menu prompt will return.