Manual

Silo Media Manager Installation and Users Guide
Hardware and Software Installation for the Server
2-23
on the right side of the property sheet. Check the boxes of the items needing to be
backed up.
Existing scheduled backups may also be used by pulling down the named backup
combo box and selecting the existing name (see Figure 2-23). To delete an existing
scheduled backup, select a backup within the named backup combo box, and then
click on the “Delete Backup” button.
Once a new backup or an existing backup has been selected, select “Immediate” or
“Scheduled” to select when the backup will run. Selecting “Immediate” will start the
backup as soon as it is received and will not schedule it for future use. Selecting
“Scheduled” will schedule your backup. To start the scheduled backup instantly,
select the current date and time.
Once the name of the backup has been entered, the volumes to backup have been
selected, and the schedule cycle has been chosen, click on the “Set Defines” button to
set the tape defines and backup parameters for the scheduled backup (refer to Section
2.8.5.1, “Setting Defines”).