User guide

Actions
Abort
Terminates operation of the MIOE SAC. When the Abort action completes, the MIOE SAC is in the
Stopped state.
Responsive Test
Runs an online test that verifies that the MIOE SAC is integrated with the LAN subsystem, is owned,
and is in the Started state.
Start
Loads the controller operational code and starts the MIOE SAC. When the Start action finishes, the
MIOE SAC is in the Started state.
Stop
Rather than automatically stopping the MIOE SAC (as the Abort action does), this action first warns
you if the SAC is currently in use (and stops it only after you confirm).
Module
A set of components that share a common hardware interconnection, such as a backplane. This object
applies only to S-series processor and I/O enclosures, in which each enclosure contains contains one
group, and a group contains only one module. The module is considered a subcomponent of the
group. IOAM enclosures contain two I/O adapter modules.
Example: Module 2.1
Attributes
Module
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required. Values
Temperature Sensor
Current Value The current temperature, in degrees Celsius (°C), inside the enclosure of the module.