User guide

variety of connection media. See also SEB port.
multifunction I/O board (MFIOB)
A ServerNet adapter that contains ServerNet addressable controllers (SACs) for SCSI
and Ethernet; a service processor; a router with ServerNet links to the processor, to the
two ServerNet adapter slots, and to one of the ServerNet expansion board (SEB) slots;
and connections to the serial maintenance bus (SMB), which connects components within
the enclosure to the service processor. The MFIOB is integrated into the I/O
multifunction (IOMF2) CRU.
multilane link
A communication link between HP NonStop Cluster Switches that can consist of multiple
ServerNet cables. Two-lane links and four-lane links are examples of multilane links.
multimode fiber-optic (MMF) ServerNet cable
A fiber-optic cable that either allows more than one mode to propagate or supports
propagation of more than one mode of a given wavelength. MMF ServerNet cable
typically supports shorter transmission distances than single-mode fiber-optic (SMF)
ServerNet cable.
N
name
For the OSM software, the name attribute is determined by the connection type. When
you use the service connection, the logical name is used. When you use the low-level
link, the service processor (SP) logical name is used.
Examples of logical names:
$DATA04-P is the logical name of the disk CRU located in group 1, module 1, slot
13.
IOMF2.SCSI-3.GRP-1.MOD-1.SLOT-50 is the logical name of the third SCSI bus
on the IOMF2 CRU located in group 1, module 1, slot 50.
Examples of service processor (SP) logical names:
SCSICRU.GRP-1.MOD-1.SLOT-3 is the SP logical name of the disk CRU located
in group 1, module 1, slot 3.
PMF.SCSI-3.GRP-1.MOD-1.SLOT-50 is the SP logical name of the third SCSI
bus on the PMF CRU located in group 1, module 1, slot 50.
network
Two or more computer systems (nodes) connected so that they can exchange information
and share resources.